Heeters Performance Center
Heeters Performance Center


Ultimax XS Drive Belt


Ultimax XS Series Drive Belts



Specifications:



Ultimax Pro Drive Belt


Ultimax Pro Series Drive Belts



Specifications:

Max2 Drive Belt
Max2 Drive Belts



Specifications:

Max Drive Belt
Max Drive Belts



Specifications:
  • Max powers more snowmobiles than any other aftermarket drive belt in the world
  • Max drive belts are hand built and use only the best rubber compounds available
  • Built into the Max belt is a tough Aramax® cord for added strength and durability
  • Full one year warranty
  • Price-----$39.95

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Square 4-point Snow Biters

Snow Biters



Specifications:
  • Digs into ice and snow to reduce track slippage
  • Size is approximately 25/32" square x 5/8" high
  • Better traction for improved acceleration, cornering and braking
  • Heat treated for extra hardness and durabiity
  • 18 per package, mounting hardware included
  • Square 4-point (#V-LP1)-----SOLD OUT

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Snowmobile Repair Manual

Vintage Snowmobiles Repair Manual



Specifications:  Volume I
  • Arctic Cat 1974-1979 (Lynx I, Lynx II, Pantera, Panther, Cheeta, El Tigre, Jag)
  • John Deere 1972-1977 (300, 400, 500, 600, 800, JDX4, JDX6, JD295/S, 340 Cyclone, 340 Liquifire, 440 Cyclone, 440 Liquifire)
  • Kawasaki 1976-1980 (SA340, SA440, SB340, SB440, SS340)
  • Price (#PG-82-820)-----$32.95

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Snowmoblie Repair Manual

Vintage Snowmobiles Repair Manual



Specifications:  Volume II
  • Polaris 1973-1979 (Apollo, Centurian, Charger, Cobra, Colt, Custom II, Electra, Gemini, Mustang, RXL, SS 340, SS Colt, TC, CX, TXL)
  • Ski-Doo 1970-1979 (Elan, Everest, Olympique, TNT)
  • Yamaha 1975-1980 (ET 250, ET300, GP338, GP433, GPX 338, GPX 4333, GS 340, GS 440, ET 340, EX 340, PR 440, GP 440, EXCEL V, SRX 44, SSR 440)
  • Price (#PG-82-821)-----$32.95

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Snowmoblie Repair Manual

Snowmobile Repair Manual

Specifications:  11th Edition
  • 472 pages featuring vehicle specifications, vehicle service, carburetor service, engine service, belt drive/converter unit, track drive, track and suspension, skis and steering.
  • Engines covered: BSE, Bolens, Brooten, Brut, CCW, Chaparral, Chrysler, Cuyuna, John Deere, Harley-Davidson, Hirth, Husqvarna, JLO, Kawasaki, Kiekhaefer Aeromarine, Kioritz, Kohler, Lloyd, Mercury, OMC, Polaris, Rockwell, Rotax, Rupp, Sachs, Sachs Wankel, Scorpion Brut, Solo, Sprint, Suzuki, Xenoah and Yamaha.
  • Manufacturers covered: Aloutte 1967-76, Alsport 1971-72, Arctic Cat 1965-84, Ariens 1969-73, Arlberg 1969-70, Arrow 1969-73, Auto Ski 1971-75, Boa Ski 1968-76, Boatel 1965-72, Bolens 1964-72, Chaparral 1968-74, Columbia 1972-75, Dauphin 1970-71, John Deere 1972-82, Eskimo 1969-71, Evinrude 1965-75, Fox Trac 1966-72, Frederick-Willys 1969, Gilson 1971-73, Harley-Davidson 1972-75, Herter's 1968-75, Homelite 1969-70, Hustler-Rustler 1968-70, Jac-Trac 1971-73, Jetstar 1970-72, Johnson 1965-75, Kawasaki 1977-82, Kometik 1970-75 Larson 1966-69, Mallard 1968-71, Mercury 1969-76, Montgomery Ward 1968-72, Moto-Ski 1965-82, Northway 1970-74, OMC 1965-75, Phantom 1970-71, Polaris 1965-86, Poloron 1970-72, Raider 1972-75, Roll-O-Flex 1971-74, Rupp 1966-78 Sabre 1972-73, Safari 1970-72, Scorpion 1966-78, Sears 1969-72, Silverline T-Bird 1967, Ski-Bee1969-70, Ski-Daddler 1966-70, Ski-Doo 1962-82, Ski-Jet 1969-70, Skiroule 1966-77 Ski-Whiz 1969-77, Ski Zoom 1971-73, Sno-Cub 1970-72, Sno Flite 1968-69, Sno Ghia 1969, Sno Jet 1966-76, Sno-Pac 1970-72, Sno-Pony 1969-71, Sno-Prince 1968-73, Snow Birdie 1968, Sno Bug 1972-75, Snow Cat 1969, Snowcruiser 1972, Snow Cruiser 1966-71, Snow Flake 1970-73, Starcraft 1970-71, Suzuki 1971-75, Tracker 1971-72, Trade Winds 1967-68, Trans-Ski 1971-72, Viking 1967-72, Wildcat 1970-71, Yamaha 1968-85 and Yukon King 1967-69.
  • Price (#ML-8130)-----$32.95

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Polaris Snowmoblie Repair Manual

Polaris Snowmobile 1984-1989 Repair Manual



Specifications:
  • Provides service, repair and maintenance information for 1984-1989 Polaris Indy Trail, 1984-1989 Polaris Indy 400, 1984-1987 Polaris Indy 600, 1987-1989 Polaris Indy Sport, 1988-1989 Polaris Indy 650, and 1989 Polaris Indy 500 models. Topics covered include general information, troubleshooting, lubrication, maintenance and tune-up, engine, fuel and exhaust systems, electrical system, oil injection system, liquid cooling system, recoil starter, drive system, disk brake, chaincase, jackshaft and driveshaft, front suspension and steering, track and rear suspension, off-season storage, and wiring diagrams.
  • Price (#ML-CS832)-----$39.95

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.






                        Ratio Rite Cup
Ratio Rite Cup

Description:
  • Made from tough polypropylene plastic
  • Custom fit lid keeps cup free of outside contaminants
  • Ratios from 16:1 to 70:1 for 1.0, 2.0 and 2.5 gallons
  • Measurements in pints, cc's and fluid ounces
  • Ratio Rite Cup (#ET-15-0108)-----$5.95
  • Ratio Rite Lid (#ET-15-0110)-------$3.55

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Tillotson Universal Carb Kit

Tillotson Universal Carburetor Repair Kits

Specifications:  Does not include needle and seat

HL & HR replacement for Tillotson #233-660, #233-672 (#L406)
L407 for HD models
L408 for HD models
HD replacement (needle has slot for fork) for Tillotson #233-682 (#L409)

Tillotson Needle & Seat

Specifications:  Does not include needle and seat
  • HL & HR replacement for Tillotson #233-660, #233-672 (#L406)------$8.29
    17/32 overall seat length, 9/32 diameter, 9/16 needle length
  • HD replacement for Tillotson #233-673 (#L407)------$8.29
    5/8 overall seat length, 3/8 diameter, 11/16 needle length
  • HD replacement for Tillotson #233-674 (#L408)------$8.29

  • HD replacement (needle has slot for fork) for Tillotson #233-682 (#L409)------$7.90
    5/8 overall seat length, 3/8 diameter, 3/4 needle length

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.


Walbro #300-719 Carb Repair Kit

Walbro Carburetor Repair Kit



Specifications:
  • Fits all WD, WDA, WDB, WR, WRA models
  • Includes instruction sheet
  • OEM Walbro brand kit
  • Kit includes only parts shown in photo
  • Price (#300-719)-----$65.95



    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Walbro Metering Diaphragm

Walbro Metering Diaphragm



Specifications:
  • Fits WD, WDA, WR models
  • Price (#V-LP410D)-----SOLD OUT

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.



Walbro Carb Repair Kit

Walbro Carburetor Repair Kits



Specifications:
  • Fits all WDA-1 models (#SN-499B)-----$32.99
  • Fits all WF (float) models, includes idle needle (#300-794)-----$46.95

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.


Walbro Gasket/Diaphragm Kit
Walbro Gasket/Diaphragm Kits



Specifications:
  • Kit for all WD1-WD38, all WDA, WDB30, WDB31, aLL WR1-WR27, WRA30, WRA37,WRD2 (#ML-92-534)-----$35.95

  • Fuel Pump Leaf Spring for all WD, WDA, WR, WRA models (#ML-98-215)-----$3.30


    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.


Walbro WF Carb Dampener Flange

Walbro WF Dampener Flange

Specifications:
  • Fits WF pumper carbs, replaces #50-11 (#WP-12-1145)-----$12.95

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Mikuni BN34/38/44mm Carb Kit

Carburetor Kit for Mikuni BN34/38/44mm

Specifications:
  • Fits Bombardier Sea Doo 88-90; Fazor I/II/III 87-90; Kawasaki JS300/SX 86-91, JS400 76, JS440 77-90, JS550/SX 82-90, Wet Jet, Sport II, Sport II Spirit 86-91; Yamaha WJ500 Wave Jammer 87-90, WR500 Wave Runner 87-89, WR650LX 90
  • The outside diameter of the gaskets & diaphragm is approximately 2 9/16"
  • Gasket and diaphragm kit (#ML-11-0289)-----$16.70

  • Complete carb kit with gaskets, diaphragms, check valves, washers, o-rings, arm pin, spring and arm (#ML-11-1463)-----$32.99

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Mikuni Super BN34/38/44/46mm Carb Kit

Carburetor Kit for Mikuni Super BN34/38/44/46mm

Specifications:  Super BN Square Pump Rebuild Kit
  • Genuine Mikuni rebuild kit includes all necessary diaphragms, gaskets, o-rings, check valves, washers and springs that are required to disassemble and rebuild Mikuni BN34/38/44/46mm square pump carbs. Fits Polaris SL/SLT/SLX780 95-96, Sea Doo GT 91, GTi 96, GTS 92-97, GTX 92-95, HX 95-97, SP 91-97, SPi 93-96, SPX 93-97, XP 91-95, Yam WJ500 87-90, WR500 90-93, SJ650 90-93, WR650 III 90-96, WR650LX 91-93, WR650 VXR 91-95, FX700 FX1 94-95, RA700DX 94-96, SJ700 94-96, WB700 93-96, WRA700 III GP 94-95, WBR700 93-94, WVT700 96, WB760 II 96, RA760/1100 95-96, Fits all Mikuni carbs with integral square fuel pumps.
  • The outside diameter of the diaphragm is approximately 2 1/4"
  • Price (#ML-11-2156)-----$52.25

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Universal Kits for Mikuni Carburetors

Universal Kits for Mikuni Carburetors

Specifications:
  • VM30, VM32, & VM34 models (zinc) (#L433)-----$13.50
  • VM36 & VM38 models (alum.) (#L434)-----$14.99
  • VM30, VM32 & VM34 models (alum.) (#L435)-----$13.50

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.



Keihin Diaphragm & Gasket Set

Keihin Diaphragm and Gasket Set

Specifications:
  • Fits all Keihin HD model carburetors
  • Price (#459)-----$22.95

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Mikuni Throttle Stop Screw

Mikuni Throttle Stop Screw

Specifications:
  • Brass screw, 1 7/16" long with 6mm threads
  • Fits 28/38/40mm spigot and 24/28mm flange carburetors
  • Price (#ET-42-5205)-----$4.10 each

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Mikuni Fuel Pump

Mikuni Fuel Pump

Specifications:  Mikuni #DF44-211-D
  • For use when fuel tank level is below carburetor
  • Vacuum operated
  • Rectangular style, flush mounting
  • One outlet, 14 LPH flow rate
  • Replaces FL-250 Odyssey stock pump
  • Price (#ET-42-5315)-----$24.99

  • Fuel pump rebuild kit (#ML-L449)-----$8.99
  • Fuel pump rebuild kit with screws & washers (#ET-42-5320, WP-12-1122)-----$15.95

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Mikuni Fuel Pump

Mikuni Fuel Pump

Specifications:  Mikuni #DF52-21-D
  • For use when fuel tank level is below carburetor
  • Vacuum operated
  • Round style
  • Two outlets, 35 LPH flow rate
  • NOTE: dual outlet pumps can be substituted for a single heavy duty pump by plugging one outlet
  • Price (#ET-42-5310)-----$32.95

  • Fuel pump rebuild kit (#ET-42-5322)-----$15.95

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Mikuni Fuel Pump

Mikuni Fuel Pump

Specifications:  Mikuni #DF52-73
  • For use when fuel tank level is below carburetor
  • Vacuum operated
  • Round style, flush mount
  • Two outlets, 35 LPH flow rate
  • NOTE: dual outlet pumps can be substituted for a single heavy duty pump by plugging one outlet
  • Price (#ET-42-5311)-----$31.95

  • Fuel pump rebuild kit (#ET-42-5322, WP-12-1123)-----$15.95

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Mikuni Fuel Pump

Mikuni Fuel Pump

Specifications:  Mikuni #DF52-92
  • For use when fuel tank level is below carburetor
  • Vacuum operated
  • Round style, flush mounting
  • Three outlets, 35 LPH flow rate
  • Price (#ET-42-6067)-----$32.50

  • Fuel pump rebuild kit (#ET-42-5322)-----$15.95

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Mikuni Fuel Pump

Mikuni Fuel Pump

Specifications:  Mikuni #DF62
  • For use when fuel tank level is below carburetor
  • Vacuum operated
  • Pentagon style, flush mounting
  • 5/16" fuel inlet
  • Two 1/4" outlets, 65 LPH flow rate
  • NOTE: dual outlet pumps can be substituted for a single heavy duty pump by plugging one outlet
  • Price (#ET-42-5312)-----$49.99

  • Fuel pump rebuild kit (#ET-42-5321)-----$19.99

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.



Mikuni Fuel Pump

Mikuni Fuel Pump

Specifications:  Mikuni #DF52-136
  • For use when fuel tank level is below carburetor
  • Vacuum operated
  • Square style, flush mounting
  • Two outlets, 31 LPH flow rate
  • Price (#WP-14-2224)-----$31.95
  • NOTE: dual outlet pumps can be substituted for a single heavy duty pump by plugging one outlet

  • Fuel pump rebuild kit (#ML-11-1844)-----$15.95

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Primer Kit

Primer Kits

Specifications:
  • For machines with primer fitting on the intake or carburetor
  • Includes "T" fitting and primer hose
  • Use optional inlet fitting for machines without connectors
  • Plunger Type (#ML-7001)-----$19.95
  • Button Type (#ML-616)-----$19.95
  • Brass inlet fitting (#ML-L7587)-----$2.40 (not pictured)

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Primer Bulb

Primer Bulb

Specifications:
  • In-line primer bulb with internal check valve
  • For 1/4" fuel line (#V-LP-700S)-----$6.99
  • For 5/16" fuel line (#V-LP-700L)-------$6.99

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Arctic Cat Nose Cone Replacement

Arctic Cat Nose Cone

Specifications:
  • Nose cone replacement for AFS models 86-93
  • Replaces #0606-307 and #0606-270
  • Color: black
  • Price (#WP-44-5201)-----Currently not available

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Polaris Nose Cone Replacement

Polaris Nose Cone

Specifications:
  • Nose cone replacement for 88-98 models
  • Color: black
  • Price (#WP-44-5209)-----$89.95

    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Snowmobile Skid Plates
Snowmobile Skid Plate Snowmobile Skid Plate

Sno Stuff Pro-Glider Skid Plates



Specifications:
  • Full length belly pan protection
  • Less drag in deep snow
  • Smooth, contoured surface reduces friction
  • Improved deep snow flotation
  • Available for: Arctic Cat, Polaris, Ski Doo & Yamaha
  • Prices start at $75.99
  • Too numerous to list
  • For specific pricing and availability inquire using the on-line Request A Part Form


    The Secure Order Form will appear on a web page separate from the one you are now viewing.  By minimizing the Order Form you may navigate through our web site adding products to the Order Form by restoring or maximizing it.




Heeters Performance Center
Heeters Performance Center

This Site is Copyright © 1999-2010 by Heeters Performance Center, Inc.  All Rights Reserved

Home Page - Motorcycles - Mopeds - Scooters - ATVs - Go-Karts - Snowmobiles - Parts & Accessories - Odds & Ends - Specials - Service
Return to Top