

Husky Sled Covers
Specifications:
- 400 Denier nylon
- Stretch cord for snug fit
- Husky sled cover (#WP-61-2002)-----$50.99
- Husky Jr. sled cover (#WP-61-2008)-----$42.99
Husky Sled Tongue Assembly
Specifications:
- Fits Husky and Husky Jr. sleds
- Manufactured with 1" square steel tubing
- Steel full swivel tongue hitch assembly
- Overall length including swivel hitch 30 3/8"
- Overall width is 25 1/2"
- Inside dimension of swivel hitch and sled mounting brackets 1 1/2"
- Includes two 6mm bolts & locknuts
- Price (#WP-61-2001)-----$76.55
Universal Hitch
Specifications:
- Heavy duty hitch, swivels up and down
- Has two 9/32" holes spaced 2 11/16" apart
- Fits round or square bumpers 1 1/4 thick or less
- Fits over round 11/16" diameter or smaller bumpers without any drilling
- Hitch pin hole is 3/8" diameter
- Price (#ML-11-1369)-----$11.99
Swivel Hitch
Specifications:
- Use with hitches that don't swivel up and down
- A must when pulling a Fold-A-Sled
- Price (#ML-11-4499)-----$9.99
Arctic Cat & Universal Hitch
Specifications:
- All Arctic Cat models 80-97 except Kitty Cat & AWS models
- Can be used as a universal hitch mounting it on a flat surface
- Price (#ML-11-1326)-----$18.99
Arctic Cat Hitch
Specifications:
- Heavy duty 3/4 inch diameter rear bar
- Fits most models 91-98
- Cougar/Mt.Cat 93-96, EXT/Mt.Cat 92-96, EXT Special 91-92,EXT 580Z 93, Jag/Dlx. 92-99, Jag Special 92, Jag Z 93-94, Pantera 91-99, Panther/Dlx. 92-99, 600 Powder EXT 97-98, Prowler 90-94, Prowler Mt.Cat 91-99, Prowler Special 91-92, Puma/Dlx. 94-96, Thundercat/Mt.Cat 93-96, Wildcat 92-98, ZR (all) 93-97, ZRT 600/800 95-96
- Price (#WP-19-2120)-----$71.99
Arctic Cat Pindle Hitch
Specifications:
- Fits most models 99-05
- Price (#WP-19-2122)-----$35.99
Moto Ski & Ski-Doo Hitch
Specifications:
- Fits Sonic LC 84 and Mirage iii 85
- Fits Escapade 87-89, Formula MX/LT/Plus/SS 85-91,
Formula Mach I 89-91, Safari/Grand Luxe 84-88, Saga 89,
Scout/E 89-91, SS25 84, Stratos/E 87-88 and Voyageur 89
- Price (#ML-B1023)-----$28.99
Ski-Doo Hitch
Specifications:
- Formula 94-97 all models
- Price (#ML-11-5990)-----$42.99
Ski-Doo Hitch
Specifications:
- Bumper mount Pindle Hitch
- Fits all models with round bumpers 94-08
- Will fit over a 1 3/8" thick or less bumper
- Price (#WP-19-2106)-----$49.99
Ski-Doo Hitch
Specifications:
- Pindle Hitch
- Fits WT & SUV models
- Price (#WP-19-2108)-----$49.99
Ski-Doo Hitch
Specifications:
- Pindle Hitch
- Fits 05-10 Rev RT & Rev RF models
- Price (#WP-19-2110)-----$49.99
Ski-Doo Hitch
Specifications:
- Fits 05-10 Rev RT & Rev RF models
- 5 3/4" long, 3/8" hitch pin hole
- Will fit over bumpers up to 15/16" thick
- Price (#WP-19-2109)-----$32.99
Polaris Hitch
Specifications:
- Indy 96-01 most models with 121" track except XC
- Price (#ML-11-5991)-----$32.99
Polaris Hitch
Specifications:
- Indy 500 SKS/650 SKS 88-96
- Price (#ML-11-1327)-----$25.99
Polaris Hitch
Specifications:
- Indy 88-95 all models except 500SKS and 650 SKS models
- Mounting hardware included
- Price (#ML-11-1541)-----$25.99
Polaris Hitch
Specifications:
- Indy (all) 84-87 except SKS models
- Price (#WP-19-2107)-----$19.99
Polaris Hitch Receiver
Specifications:
- All Edge models 01-05
- 3/4" ID receiver
- Receiver only, requires one of the inserts shown below
- Price (#WP-19-2130)-----$47.99
Polaris Hitch Insert
Specifications:
- Standard insert for #WP-19-2130 hitch receiver shown above
- 3/4" diameter shank
- Price (#WP-19-2131)-----$38.99
Polaris Hitch Insert
Specifications:
- Pindle insert for #WP-19-2130 hitch receiver shown above
- 3/4" diameter shank
- Price (#WP-19-2133)-----$38.99
Yamaha Hitch
Specifications:
- Phazer & Phazer II PZ480/E 84-99, VT480 91-99
- Price (#ML-11-0163)-----$48.99
Yamaha Hitch
Specifications:
- Enticer 77-88, Excell III 81-88, Excel V 79-80, Ovation/E 89-00
- Price (#SP-12-108)-----$77.88
Yamaha Hitch
Specifications:
- Bravo 250 LT 82-01
- Price (#SP-12-111)-----$77.88
Universal Fit Snowmobile Covers
Manufactured by Dowco
- Constructed of heavy duty breathable Dowco canvas treated to be water, fade and mildew resistant.
- Sewn-in shock cord, grommets and straps with hooks provided to tie down for trailering.
- Double sewn seams.
- Zipper for easy gas tank access.
- Color - black
- Small - fits sleds up to 94" long (nose to tail) (#ML-1297)-----$94.99
- Medium - fits sleds up to 102" long (nose to tail) (#ML-1298)-----$99.99
- Large - fits sleds up to 109" long (nose to tail) (#ML-1299)-----$104.99
- Extra Large - fits sleds up to 115" long (nose to tail) (#ML-1319)-----$114.99
Snowmobile Trailer Glide System
Specifications:
- Made of tough HDPE plastic, lifetime warranty
- Makes loading and unloading trailer easier
- Carbides never make contact with bottom of grooves
- 3" wide slots and 4 thick ribs allow for nearly 8" of ski stance variance
- Overall width of one glide 5 5/8 inches
- Clip fasteners and stainless steel screws included
- Quick simple installation
- Price (#ML-19-0025)-----$3.99 per foot
Trailer Glide System Clips
Specifications:
- Made of same tough HDPE plastic which allows for expansion of glides in all temperatures
- Set of 8 clips with stainless steel screws
- Price (#ML-11-7830)-----$12.44


This Site is Copyright © 1999-2012 by Heeters
Performance Center, Inc. All Rights Reserved
Home Page - Motorcycles - Mopeds - Scooters - ATVs - Go-Karts - Snowmobiles - Watercraft - Parts & Accessories - Odds & Ends - Specials - Service |
Return to Top